Hinges with built-in safety switch (CFSW) and new Eleroll roller tracks are among the solutions recently developed by Elesa, a company that produces standardised plastic and metal components for industrial machinery and equipment. The CFSW hinge is a safety device which interrupts the power supply when the door...
This new type of single valve gate has been developed by Thermoplay with the purpose to contain the overall dimension facilitating the installation inside the mould and to maintain at the same time an optimal balancing of the melt flow. The Thermoplay single nozzle is provided with...
One of the leading Georgian industrial construction companies starts producing sandwich panels with Saip Contitech technology showcased in CeDePa. JSC Panex has chosen Saip for the supply of a full line for the continuous production of wall and roof sandwich panels. The project involves a Georgian...
Gefit has recently manufactured a mould for polypropylene closures for small nail polish containers. The mould is based on the so called unscrewing technology and features specially slides to define the curved shape of the 57-mm high closures. The relevant aspect of this development consists in the extremely low cycle time that the...
In April, an important Spanish processor commissioned to Bandera a high-output 5-layer blown film coextrusion line. The specifications of this line make it possible to process polyolefin materials achieving high outputs. This coextrusion line has been tested at the very end of October in the new R&D department at...
On October 23 and 24, Moss opened its doors at its Reggio Emilia (Italy) premises to introduce its most innovative machines for printing and moulding plastic containers, of which the company is the largest manufacturer globally. In addition to Italian and foreign clients and suppliers...
Sipa received a very interesting call recently from a new company, not far from Vittorio Veneto (near Treviso, Italy, where it is headquartered), that was developing an innovative range of ultra-light high-performance compressed gas cylinders. CTS, Composite Technical Systems, based near Udine (Italy), wanted...
The “Revamping Day” held at the Gefran headquarters in Provaglio d'Iseo (near Brescia, Italy) was dedicated to the revamping of injection moulding machines for thermoplastics. The initiative, which took place at the beginning of October, had a positive response from industry experts and system integrators from all over Italy...
Mexican manufacturer of polyethylene pipes, Valtic, selected the technological solutions of Tecnomatic to strengthen its market leadership position. “In less than ten years the company passed from an output of 1,500 kg per year to over ten thousand tons placing itself as a processor recognized for the quality of its products...
Her name is Strati and she came to life after 44 hours of printing and 2 days of assembly at Chicago’s International Manufacturing Technology Show, one of the world’s largest industrial trade fairs. This world first was created by American company Local Motors, a small car manufacturer...
At Friedrichshafen Star Automation Europe has exhibited two new robots and a packaging application in collaboration with Arburg and Hofstetter. The first robot series - the ES-800II - is ready to be marketed, while the other series - the XW-122 - will be launched in spring 2015...
A new complete line for the co-extrusion of polypropylene sheet has been ordered from Union by a converter in the south of Italy. The line will be used to produce food wrap 950 mm wide with thickness ranging from 0.3 to 1.5 mm at a hourly production rate of over 1,000 kg. The plant comprises two single-screw extruders configured to ensure....
In 2014, Exact is celebrating forty years of activity and, for this occasion, it has launched the new E-15 extruder, which extends its range of product introducing a system for hot recovery. The new extruder is suitable for both closed loop in-line recycling (trimmings of thermoplastic films such as LDPE, LLDPE, mLLDPE, HDPE and EVA as well as
An extrusion line for HDPE dimpled membrane with net width of 4 meters has been recently manufactured by Amut for a major Russian producer of building materials. HDPE dimpled membranes are widely used for the protection and drainage of underground walls, as well as for the protection and ventilation of waterproofing...
The whole range of the Telia Gearless flexographic printing machines developed by Bielloni Converting can be now equipped on request with a new enhanced drying tunnel featuring an innovative hot air recirculation and recovery system. This solution allows energy savings up to 30% in addition to ensuring excellent results...
The German firm Inoex turned to the Italian manufacturer Tecnomatic for the supply of extruders and extruder heads to equip their Advantage lines for pipe diameters of up to 1000 mm. The two companies have already presented a line equipped with a Vega extruder and a Venus 630 head for pipes with diameters from 280 to 500 mm to major European converters...
Husky Injection Molding Systems continues to make significant investments to support the strong growth of its hot runners and controllers customers. The company established its hot runners and controllers business as a strategic priority early in 2013 and is focused on developing innovative products and services that solve customers’ key...
Under the global banner of “Your Free Choice in Robots”, Sepro Robotique exhibits at Fakuma 2014 a total of fourteen robots. Nine are demonstrated on the Sepro stand and five in the booths of injection-molding machine manufacturers. Together, they represent one of the industry’s most complete ranges of...
The "Smart Plastic" event, organised by Campetella Robotic Center at its headquarters in Montecassiano (near Macerata, Italy) on September 19 and 20, were even more successful than expected: it consisted of two days dedicated to the most advanced handling technologies for injection moulding...
