During Plast 2015 Autodesk addressed the main issues related to the changes and developments taking place in the manufacturing sector. Thus there was discussion of the opportunities deriving from additive manufacturing and advanced materials and, in particular, the event provided the stage for the Italian debut of...
Artemis Racing is a professional sailing team, founded in 2006 by Torbjörn Törnqvist, and is ready to undertake the ultimate challenge in competitive sailing: the America’s Cup. With a victory in the upcoming 35th America’s Cup, scheduled for 2017 in Bermuda, Artemis Racing would bring the oldest trophy in international sport to Sweden, Törnqvist’s home country, for the first time...
After an absence from the stretch blow moulding market for more than 10 years, Magic MP (Monza, Italy) is back with the BME machine, the first fully electric machine for single-stage processes exhibited at Plast 2015. Marketed as the amalgamation of technology at the service of processors, most prominent among the...
At Plast 2015, Gruniverpal exhibited its “pièce de résistance”: the machines in highest demand on the market, particularly recommended for handling moulds. The Minidrel 20S and 60S are ideal solutions for absolute precision positioning during lifting operations in the injection press. These machines are the current state of the art in...
In terms of visits and interest shown in its products and innovations at its booth, Rivi Magnetics expressed great satisfaction for the results it achieved at Plast 2015. The company, in fact, had two booths dedicated to thermoplastic processing solutions and solutions for thermosets...
Specialists for over thirty years in the production of systems to control and adjust the temperature on industrial processes, Sella has always worked with leading Italian manufacturers of machinery and lines, including equipment for processing plastic and rubber. The best temperature control is achieved by...
Available for machines of all tonnages, new or reconditioned, the Sympli electropermanent magnetic clamping system from SPD (an exhibitor at Plast 2015, hall 22) is designed to speed up mould change operations on injection presses. Flexibility, consistency and safety are the main advantages offered by this system in...
Among the proposals for plastic welding that Leister Technologies has brought to Plast 2015, the Weldplast S1 manual extruder is particularly interesting, ideal for welding sheets between 4 and 12 mm in thickness. Ergonomic, manageable and light (it weighs just 4.7 kg), it processes the most common plastic materials...
The German-based company Tebis, which has a branch in Rivoli, near Turin (Italy), chose Plast 2015 as the platform for unveiling its new Tebis V 4.0 CAD/CAM suite of modules for manufacturing models, moulds and mechanical components. The interface has been renewed without detriment to its tried-and-tested and much appreciated features...
From June 25 to July 2 KraussMaffei presents in Italy the Europe-wide CX Roadshow 2015. At 3 different locations the company will show a live demonstration with one of its successfully reworked CX machine series with clamping forces from 35 to 650 tons, the KM CX 35-180. The CX 35-180 will produce a technical part, which...
At Plast 2015, Caccia Engineering unveiled the new RT3000H rotational moulding machine fitted with the Smart Cooling System, a concrete example of the high degree of reliability and intuitive technology reached by its rotational moulding and mixing technology. With 3 or 4 independent carriages and 6 zones...
In 2015 Gimatic is celebrating its thirtieth anniversary in the sector of industrial automation. Founded in 1985, the company pays particular attention to topics associated with energy saving, and participated at Plast exhibiting the Ultralight EOAT gripper system, an innovative carbon fibre based product...
Exploiting the experience it acquired as contractor in the extrusion sector, today SA2P applies the same logic for feasibility studies and production technologies in the field of 3D printing. The application scopes of industrial 3D printing are truly vast, just as the spectrum of users for this relatively young technology are increasingly broad...
At the Plast 2015, Netstal demonstrated its expertise within the industry of medical technology through the production of insulin pen piston guides on an Elion 1750-510. The polyoxymethylene (POM) parts were manufactured on a 16 cavity mould from Kebo in a cycle time of approx 8.5 seconds, which is very fast for this application...
A provider of testing equipment designed to evaluate the mechanical and rheological properties of materials, Instron - an ITW Test and Measurement division - exhibited at Plast 2015 its latest developments for tests on plastics. Its presence at the fair was focused in particular on the ways to address the identified main...
With Liquidmetal, Engel opens the door to completely new classes of material and product characteristics; metal alloys can now be efficiently injection moulded. As the exclusive machine manufacturing partner of Liquidmetal Technologies (Rancho Santa Margarita, California), Engel is the only provider worldwide to offer...
Easylink, the new range of automatic coupling stations introduced by Piovan at Plast 2015, is bringing technologically advanced solutions guaranteeing a total absence of cross-material contamination and high production performance. Manual coupling stations are still widely used in the plastics processing industry. They are suitable for...
At Plast 2015, Rivi Magnetics presented solutions both for plastic materials and for rubber, thus providing further confirmation of the dynamic nature of its activity in recent years. The company presented various new developments, starting with its range of MC control units, able to reach the highest performance levels currently requested and...
A complete line for the coextrusion of polypropylene hollow sheets has been supplied by Union to a South American processor. The line is able to produce sheets with a useful width of 2500 mm and thicknesses ranging from 2 to 4 mm at an hourly rate of around 600 kg. The calibrating unit is equipped with...
