On March 5, under the new CEO nomination Craig Ward, Negri Bossi finalised the transformation process under new ownership. A graduate in Polymer Science, Craig started his career in the plastic material world at the...
The XW-VI and Es-II series will be previewed by Star Automation at PLAST 2015 (Hall 24, stand C81/D82). These are new vertical-entry robots, representing and strengthening the company’s core business thanks to the high performance of the XW line and to the high quality/price ratio of the...
Steep quality requirements especially in the high-end film market require 100% defect detection and monitoring of material quality during production. Only comprehensive and reliable material qualification returns optimum material quality and...
In Orlando, USA, Eugen Hehl has recently been inducted into the “Plastics Hall of Fame” that is located at the University of Massachusetts in Lowell, USA, and it has been honouring persons who have made significant contributions to the development and growth of the plastics...
The Freeformer will be presented for the first time in Italy, demonstrating how one-off parts and small, multiple-variant batches can be produced from standard granulate without a mould in an additive manufacturing process, using Arburg Plastic Freeforming (AKF). The applications on view in the...
On 13 March, Cribis gave Piovan its "D&B Rating 1", indicating the highest level of economic and financial dependability of a commercial transactions firm. This certification represents the highest assessment level of economic soundness and commercial reliability of an organization, and it is issued exclusively to companies that...
After the sister-company in Mexico, it is the turn of North America. The new American branch of Frigosystem-Corema has been established in February 2015: it’s a lead of the Italian sales cell Go Trade and it’s, in fact, registered as Go Trade North America. The headquarters of the new company is in...
Moulding tests at Negri Bossi in Cologno Monzese, just outside Milan. A 32-cavity mould for the production of 74-gram caps for food containers has been installed on a Canbio V220-850 injection press, which has been shown to be reliable, quiet and easy to use. The manufacturing cell also included a Sytrama robot and a GD92CU automation...
Avoiding an unbalanced transmission of the clamping force to the mould and allowing the use of moulds with bigger sizes than those of the platens. To this scope the Isit range of blow moulding machines with accumulator heads, developed by ST Soffiaggio Tecnica, features a 3-platen clamping unit with...
In cooperation with Wegaplast, headquartered in Toscanella di Dozza, near Bologna (Italy), Engel has developed a production process for design objects, also using variothermal injection moulding technology. In this application the Swiss company HB-Therm is the partner for heating and cooling...
The Swiss manufacturer of thermoforming machines WM Wrapping Machinery has recently delivered a vacuum pressure forming machine with steel rule cutting and holes punching to De Ster company at their headquarter facility in Belgium. De Ster is a worldwide well known company specialized...
At NPE 2015 Sacmi will be presenting the new version of the 48-cavity CCM (Continuous Compression Moulding) for the production of CSD (Carbonated Soft Drink) caps, optimized to ensure a power consumption even lower than the previous versions. Able to achieve output rates of up to 2000 light caps per minute (for mineral waters), the machine is...
Plastiblow at NPE 2015 will be showing for the first time in North America a fully electric PB5E-DL double station machine in operation that will produce a 350-ml flat/oval personal care bottle in 4+4 cavity setup. The technical solutions adopted to achieve the servo-driven movements...
The testing of a complete coextrusion line for corrugated PC sheets has been scheduled for middle March at the headquarters of Union in San Vittore Olona (near Milan). The sheets will have a width of 1,100 mm and thicknesses varying from 0.8 to 1.2 mm. This line consists of a primary single-screw extruder...
Persico Automotive has developed EcoCover, a new spray skin process that achieves amazing results in a wide range of colours. It can even create faux stitching. During the EcoCover process, a release agent is first applied to the mould. Then, using in-mould coating, the paint is sprayed on, followed by a polyurethane...
At the Mecspe 2015 (Parma, Italy, March 26-28) Rampf will be showcasing its innovative solutions for gasketing, encapsulating, and bonding. The focus is on the fast curing two-component polymer gasket Raku-PUR Speed and the compact robot cell DC-RS250, which guarantee speed and precision...
Developed by Frigosystem for industrial process cooling, ACE (Adiabatic Cooling Energy) is a new range of industrial air/water exchangers relying on the adiabatic principle. This cooling system relies on the physical principle by which the evaporation of water lowers the ambient air temperature. This principle, i.e. the adiabatic principle, allows...
A key milestone for the IPS (Injection Preform System) platform, this manufacturing solution that stands out on account of high reliability, high performance and user-friendliness: the already-successful IPS 220 - which has been on the market for 3 years - will be joined by the new IPS 400, previewed at Imola...
The short-circuit protection function integrated on Xtra power controllers from Gefran has recently obtained the international patent. Such a function protects the system and the power junctions in the device against transient current peaks and short-circuits without extra-rapid fuses or circuit breakers...
