The gate bushing is typically used in hot runner nozzles for preserving the gate point quality and preventing plastics wear in nozzle components. Gate bushings are also used in the event of frequent cavity plate changes. The type of gate bushing is determined based on the resin used and the application...
Experience, technological development and innovation in the foam field have rewarded Union once again with another important “turnkey" contract for the supply of the extrusion line of over 250,000 cubic meters per year of extruded foam polystyrene boards (XPS) for the building industry...
What to do to reduce noise, dust and energy consumption when recycling scrap directly on the processing machine? For this application Adler has developed a cutting system which, by exploiting the combination of helical scissor cutting and the multiplicity of cutting edges, has achieved the desired result...
In recent times, a way to limit the spread of the Covid-19 pandemic has consisted of the adoption of behaviours such as social distancing. However, the compliance with these rules, as well as with others indicated by the competent authorities in order to overcome the current health crisis, has not prevented many companies from...
One of the best-selling extra virgin olive oils in Italy now also comes in PET bottles. Monini, located not far from Perugia in the center of the country, packs its Classico product in two sizes of PET bottles, 450 and 650 ml. The bottles, which complement glass bottles in other sizes, are produced on Sipa SFL 4/4 linear blowmoulder...
The project by Sadas Group and Sei Sistemi has been finalized, and on November 30, 2020, Alsiter has come to life. The basic concept of Alsiter is to combine the flexibility and process know-how of Sadas Group with the tailor-made approach and solid experience developed by Sei Sistemi across all industrial and manufacturing sectors, creating one...
In heat treatment applications, the accurate control of electric heating loads enables a precise and efficient temperature control, with a consequent positive impact in terms of energy saving. To this regard, Gefran closes a 2020 by launching the GPC power controller series and GSLM series of power management units for electrical loads...
What are the main process anomalies that commonly affect injection molders and how to detect them? Try to imagine the most complex part ever: it is a delicate trade-off of polymer selection, processing, part design and mould design. Several elements could affect the injection process, from the...
In 2000 Amut had delivered to Coca Cola Amatil in New South Wales, Australia, one of the first plants in the world for the recycling of post consumer PET bottles destined for the production of food rPET, thus starting the "bottle-to -bottle ". In recent years, however, China and South East Asia in general have banned imports of plastic waste, so that...
Having the data is not the same as being able to analyze and use them to improve procedures and production. Applying the Pareto Principle it is possible to say that 20% of the problems cause 80% of the losses. Especially today, the market requires fast decisions and practical actions, but without real data there is no true improvement in the...
Campetella Robotic Calling 2020 took place from October 1 to mid-November. The open house event was organized in order to present two fast IML systems and the new concepts developed by the Italian manufacturer of robots and automation systems. Everything was taken care of in detail and nothing was left to chance with the aim of...
Regularly inspected and maintained production equipment is the prerequisite for consistently efficient, safe and high-quality production. In practice, however, internal maintenance capacities are not always up to this task. Engel care maintenance packages see the injection moulding machine manufacturer and automation expert Engel offer its...
Arburg has been very active in the fight against coronavirus since the beginning of the pandemic. An outstanding example is the multifunctional face mask, which was developed in collaboration with partners and made ready for series production in only 41 days. May saw the start of production of face masks made from LSR and PP, initially as versions for everyday use. To protect both the wearer of the mask and those in the surrounding area...
PrintCYC is a value chain initiative for the recyling of printed films. Current members are the machine suppliers Brückner Maschinenbau, Kiefel and PackSys Global, the CPP film specialist Profol, the ink manufacturer hubergroup, the converter Constantia Flexibles as well as the recycling technology specialist Erema. The initiative is...
Despite the pandemic that has shocked the whole world, Gefit has continued its growth path, scoring important numbers, also thanks to the many equipment produced and supplied to customers in the medical field. In the Moulds&Assembly division, based in Fubine (Alessandria, Italy), many multi-cavity...
The new duo speed injection moulding machine sees Engel combine productivity and efficiency with short cycle times in the high clamping force range. Available with clamping forces from 5,000 to 11,000 kN, the new large-scale machine type is aimed at manufacturers of buckets and storage and transport containers...
Anyone seeking to get one step ahead and sniff out trends in medical technology, made a point of attending the Arburg Summit: Medical 2020 on November 19. Thanks to the digital format of this summit meeting, twice as many guests were able to attend as were at the comparable, physical event in the previous year. More than ...
India’s largest beverage company, Parle Agro, has chosen Sipa for high-volume production of PET preforms for fruit drink bottles. Parle Agro has five Sipa XForm injection moulding systems hard at work producing 5.7 million PET preforms every day to make bottles for fruit drinks. There are...
ABB’s latest innovative solution for automotive manufacturing - the Compact Interior Paint station - combines 12 robots to offer a space-saving alternative to traditional robotic interior painting solutions, helping automotive OEMs reduce the footprint of their paint booths by up to 33%, while being able to paint a variety of vehicle types, from...
